
If your boiler is more than about ten years old, breaking down more often, struggling to heat the house or costing more to run, it may be nearing the end of its working life. One of those signs on its own rarely means you need a new boiler, but two or three together usually point that way, and it is far better to find out in autumn than on the coldest night of the year.
This post covers the signs to look for, the warning signs that are about safety, the checks you can make yourself and how to weigh a repair against a replacement. You can look at the outside of your boiler and its controls, but never remove the casing or touch any gas parts. Anything inside the boiler is a job for a Gas Safe registered engineer.
Most gas boilers last roughly 10 to 15 years with regular servicing. Age alone is no reason to replace one, but an older boiler showing some of these signs is worth a proper look:
Some signs are not about age at all. They mean the boiler may not be burning gas safely, which can produce carbon monoxide, a poisonous gas you cannot see or smell. Look out for a yellow or orange flame where it is normally blue, black soot or brown staining on or around the boiler, and a carbon monoxide alarm going off.
If you notice any of these, turn the boiler off, open the windows and do not use it again until an engineer has checked it. If you smell gas or think there is a carbon monoxide leak, call the National Gas Emergency Service on 0800 111 999, which is free and open 24 hours a day. If anyone feels unwell, with headaches, dizziness or sickness, get medical help.
These checks rule out common, cheaper problems and need no tools.
Much of south west London is supplied by Thames Water, which says all the water in its region is hard. Hard water carries dissolved minerals that leave limescale behind when the water is heated. Inside a boiler, that scale builds up in the heat exchanger, the part that passes heat from the burning gas into your heating and hot water.
As the scale thickens, the boiler works harder to heat the same water, which often lies behind kettling and rising bills in older boilers around Kingston. Heavy scale is hard to undo, so a repair on an older boiler sometimes only buys a little time. If you do replace your boiler, ask your installer how the new one will be protected from scale and sludge.
These questions usually make the answer clear:
By law, only a Gas Safe registered engineer can install, repair or service a gas boiler. Riverside Construction Group is Gas Safe registered. Whoever you use, ask to see the engineer's Gas Safe ID card, which shows the type of gas work they are qualified to do.
A replacement starts with a visit to look at your current boiler, pipework, radiators and hot water use, so the new boiler suits the house. A combi boiler heats water as you use it and suits many flats and smaller homes. A system boiler with a hot water cylinder often suits larger houses with more than one bathroom. A straightforward swap often takes a day or two.
A boiler that struggles in October usually finds January harder. Deciding now lets you choose the right boiler and a date that suits you, rather than whatever is available after a breakdown in a cold snap.
If your boiler is showing a few of these signs, Riverside Construction Group can visit, look at your boiler and your home, and give you honest advice on whether it is time for a new one. You can find out more about our boiler installation service and book a visit from there.